Just Wood | Pick Puck 2.0
• Diameter: 1.57 inches (40mm)
• Thickness: 0.2 inches (5mm)
Custom inlaid with a range of exotic wood inlays, our patent-pending pick puck is the ultimate guitar pick holder. Stick anywhere that is most convenient for you! See photos below for application ideas!
Our Pick Pucks attach using our GuitarSafe™ Micro-Suction pads which are modeled after a gecko's foot. Pick Pucks do not include the picks shown in photos.
Improvements made in the NEW 2.0 Design
- Lower profile (5mm vs. 8mm thick)
- Smooth beveled edges
- Precision molded out of Polycarbonate
- Now supports picks of any thickness (will hold a piece of paper too)
- Inlay channel like our capos
GuitarSafe™ Micro-Suction Pads
Our proprietary GuitarSafe™ Micro-Suction Pads are modeled after a Gecko's foot, using suction instead of adhesive to adhere to your guitar.
We tested multiple formulations of micro-suction material before finalizing the formula for our GuitarSafe™ pads. Some formulations were far too aggressive and others not quite aggressive enough. Instead, we wanted it to adhere safely to the guitar's finish but not so aggressively that it could cause damage to delicate finishes. The pad's surface contains thousands of microscopic air pockets that create partial vacuums between the puck and the target surface. It isn’t pressure sensitive and won't leave any residue behind. It can also be used repeatedly without losing its gripping power.
To see our ongoing testing blog on the subject click here.
If your Thalia Pick Puck loses some of its bonding power, simply wipe the GuitarSafe™ Micro-Suction pad with a damp cloth to remove the dust and it will work as good as new. To remove the pick puck, you simply pull up very slowly on one edge to break the suction.
Warning - Do not use pick puck with nitrocellulose or lacquer based finishes.
SPECIFICATIONS:
FITS PICKS UP TO 2MM THICK
DIAMETER: 1.57 INCHES (40MM)
THICKNESS: 0.2 INCHES (5MM)
Application of the Pick Puck
In this short video, Chris gives you an overview of the Pick Puck 2.0 and how a pick puck allows you to attach your Thalia Capo to your headstock...
- Lower profile (5mm vs. 8mm thick)
- Smooth beveled edges
- Precision molded out of polycarbonate
- Now supports picks of any thickness (will hold a piece of paper too)
- Inlay channel like our capos
Our proprietary GuitarSafe™ Micro-Suction Pads are modeled after a Gecko's foot, using suction instead of adhesive to adhere to your guitar.
We tested multiple formulations of micro-suction material before finalizing the formula for our GuitarSafe™ pads. Some formulations were far too aggressive and others not quite aggressive enough. Instead, we wanted it to adhere safely to the guitar's finish but not so aggressively that it could cause damage to delicate finishes. The pad's surface contains thousands of microscopic air pockets that create partial vacuums between the puck and the target surface. It isn’t pressure sensitive and won't leave any residue behind. It can also be used repeatedly without losing its gripping power.
To see our ongoing testing blog on the subject click here. Our GuitarSafe™ Micro-Suction Pad technology is now also available on our Taylor Acoustic Pick Guards!
If your Thalia Pick Puck loses some of its bonding power, simply wipe the GuitarSafe™ Micro-Suction pad with a damp cloth to remove the dust and it will work as good as new. To remove the pick puck, you simply pull slowly or twist to break the suction.
